Netgear DST6501 - Add-on DST Adapter User Manual
Manage the DST Adapter Network and Settings
26
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST
Use the Factory Reset Button to Restore Factory Settings
CAUTION:
This process erases any settings that you have configured in the DST
adapter.
adapter.
To restore factory settings:
Factory Reset
hole and
button
hole and
button
1. Insert a paper clip into the Factory Reset
hole and hold it for two seconds, and then
release the button.
The Power LED blinks green.
All the LEDs turn off after 3 seconds, and then
the Power LED lights solid green for about 30
seconds.
seconds.
2. Check the DST adapter status.
The other LEDs show the DST adapter’s
status:
status:
•
WiFi LED. The WiFi LED lights sold blue if
WiFi is enabled.
WiFi is enabled.
•
DST LED. The DST LED lights if a compatible DST device is connected to the DST
adapter.
adapter.
•
Ethernet LED. The Ethernet LED lights if a powered-on device is connected to the
DST adapter’s Ethernet port.
DST adapter’s Ethernet port.
Erase the DST Adapter Settings
You can erase the current configuration and restore the factory default settings.
CAUTION:
This process erases any settings that you configured in the DST adapter.
To erase the DST adapter’s current settings:
1. With an Ethernet cable, temporarily connect your computer to the Ethernet port on the
DST adapter.
2. Launch a web browser from the computer.
3. Enter http://www.mywifiext.net.
3. Enter http://www.mywifiext.net.
A login window displays.
4. Enter the DST adapter user name and password.