KitchenAid 30" Convertible Hood with 400 CFM Rating Use & Care Manual

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting

installation. Read and follow the instructions provided

with any tools listed here.

Tools needed

■

Drill

■

" (3 cm) drill bit

■

" (3 mm) drill bit for pilot holes

■

Pencil

■

Wire stripper or utility knife

■

Tape measure or ruler

■

Caulking gun and weatherproof caulking compound

■

Flat-blade screwdriver

■

Phillips screwdriver

For vented installations, you also need:

■

Saber or keyhole saw

■

Vent clamps

■

Metal snips

■

Compass or 8" (20.3 cm) circle template

Parts supplied

Remove parts from package. Check that all parts are included.

■

2 - Metal filters

■

6 - 4.5 x 13 mm mounting screws

■

3 - 4 x 8 mm damper screws

■

" x 10" (8.3 x 25.4 cm) damper/vent connector

■

4 - 5 x 45 mm screws

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS