KitchenAid 30" Convertible Wall-Mount 400-CFM Glass Canopy Hood Dimensional Illustrations
Page 1 of 2
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Instructions packed with product. Specifications subject to change without notice.
Ref. W10526059
3/16
PRODUCT MODEL NUMBERS
UXW6530B
UXW6536B
Electrical: A 120-volt, 60-Hz, AC-only, 15 amp, fused electrical circuit
is required.
CABINET DIMENSIONS
*For non-vented (recirculating) installations
IMPORTANT:
IMPORTANT:
Minimum distance “X”: 24" (61 cm) from electric cooking surface
Minimum distance “X”: 27" (68.6 cm) from gas cooking surface
Suggested maximum distance “X”: 36" (91.4 cm)
Minimum distance “X”: 27" (68.6 cm) from gas cooking surface
Suggested maximum distance “X”: 36" (91.4 cm)
The chimneys can be adjusted for different ceiling heights. See the following
chart.
Vented Installations
Min. ceiling height
Max. ceiling height
Electric cooking surface
7' 4" (2.23 m)
9' 5" (2.87 m)
Gas cooking surface
7' 7" (2.31 m)
9' 5" (2.87 m)
Non-Vented (Recirculating) Installations
Min. ceiling height
Max. ceiling height
Electric cooking surface
7' 4" (2.23 m)
9' 9" (2.97 m)
Gas cooking surface
7' 7" (2.31 m)
9' 9" (2.97 m)
NOTE: The range hood chimneys are adjustable and designed to meet
varying ceiling or soffit heights depending on the distance “X” between the
bottom of the range hood and the cooking surface. For higher ceilings, a
Stainless Steel Chimney Extension Kit Part Number W10294735 is available
from your dealer or an authorized parts distributor. The chimney extension
replaces the upper chimney shipped with the range hood.
10" (25.4 cm) min.
13" (33.0 cm) max.
9¹⁄₂
" (24.1 cm)
2" (5.1 cm) min.
9" (22.9 cm) min.*
Centerline
Side
cabinet
Side
cabinet
Vent and power
supply cable
entry location
20" (50.8 cm)* min.
30" (76.2 cm) or
36" (91.4 cm)
“X”
bottom of
canopy
to cooking
surface
10" (25.4 cm) min.
13" (33.0 cm) max.
Cooking surface
Range Hood - 30" (76.2 cm) and 36" (91.4 cm)
PRODUCT DIMENSIONS
* For non-vented (recirculating) installations
** For vented installations
** For vented installations
VENTING METHODS
■
Vent system must terminate to the outdoors except for non-vented (recirculating) installations.
■
Do not terminate the vent system in an attic or other enclosed area.
■
Do not use 4" (10.2 cm) laundry-type wall cap.
■
Use metal vent only. Rigid metal vent is recommended. Plastic or metal foil vent is not
recommended.
■
The length of vent system and number of elbows should be kept to a minimum to provide
efficient performance.
For the Most Efficient and Quiet Operation:
■
Use no more than three 90° elbows.
■
Make sure there is a minimum of 24" (61 cm) of straight vent between the elbows if more than
1 elbow is used.
■
Do not install 2 elbows together.
■
Use clamps to seal all joints in the vent system.
■
The vent system must have a damper. If the roof or wall cap has a damper, do not use the
damper supplied with the range hood.
■
Use caulking to seal exterior wall or roof opening around the cap.
■
The size of the vent should be uniform.
20"
(50.8 cm)
30" (76.2 cm) or
36" (91.4 cm)
13³⁄₁₆"
(33.5 cm)
10⁷⁄₈"
(27.6 cm)
17³⁄₁₆" (43.7 cm)
**27¹⁄₈" (68.9 cm) min.
**41¹⁄₈" (104.5 cm) max.
*27¹⁄₈" (68.9 cm) min.
*45¹⁄₂" (115.6 cm) max.