KitchenAid 24'' 6-Cycle/5-Option Dishwasher, Architect® Series II Installation Guide

Check that power supply wire or cord does not touch dishwasher 
motor or lower part of dishwasher tub.

Place the plastic access panel against the dishwasher leg.

Check that the lower edge of the access panel touches the floor. 
Adjust if necessary.

Using a flat-blade screwdriver, turn the fasteners 

¹⁄₄ turn clockwise 

to lock into place. The fasteners slot will be straight up and down 
when properly locked.

Check that grounding clip is attached to the lower panel. Position 
the lower panel behind the access panel. On some models there 
is insulation on the access panel that must fall behind the 
insulation on the lower panel.

Hold the 2 panels together and place them against dishwasher 
leg. Using a Phillips screwdriver or 

¹⁄₄" nut driver, reinstall the 

screws through the holes in the access panel, and the slots in the 
lower panel.

Check that the lower edge of the lower panel contacts the floor. 
Adjust if necessary.