KitchenAid 24-Inch 6-Cycle/7-Option Dishwasher, Pocket Handle Installation Guide

Remove the ground connector screw and place through the ring 
terminal of the green ground wire. Reattach and tighten the 
ground connector screw.

NOTE: Do not pre-twist stranded wire. Twist on wire connector. 
Gently tug on wires to be sure both are secured.

Connect wires black to black and white to white, using UL Listed/
CSA Approved twist-on wire connectors (included with power 
supply cord kit).

If needed, see website for animated representation of this step. 
Visit www.kitchenaid.com/electrical under FAQ tab.

Tighten strain relief screws to secure cord.

Place wires inside terminal box. Insert tabs on left side of cover. 
Make sure wires are tucked inside box. Close cover ensuring 
wires are not pinched. Use 

¹⁄₄" hex-head socket, nut driver or 

Torx

®

 T20

®

 screwdriver and previously removed screw to secure 

cover.
NOTE: Do not plug into outlet until instructed to do so.