Draper Cinefold 218089 Leaflet

The Cinefold frame and legs are built of 1" (2.5cm) square structural aluminum 
tubing and are conveniently color-coded and labeled for quick assembly. 
Steel hardware is cadmium plated. When assembled, the bottom of the frame 
is normally 44" (112cm) above the floor and adjusts in 6" (15cm) increments. 
Hinges are tempered steel and lock positively. Frame, legs, viewing surfaces and 
accessories are all standardized for easy replacements or additions to the system. 

Carrying Case—Cinefold comes complete with a tough carrying case 
designed for maximum service and dependability. Constructed using 
rotationally molded polyethylene, it includes fully integrated handles 
formed into each end of the case and a rubber grip handle recessed 
into the lid. Each case has two, 1" W x 3" H (2.5cm x 8cm) diameter 
impact resistant polyolefin wheels molded in the wheel wells. Load 
capacity is 200lbs (91kg). per wheel. Cases are designed to stack with the lids in place or nest 
compactly with lids off.

T-Legs—Constructed of sturdy 1" (2.5cm) square hard-alloy structural aluminum tubing, clear 
etched and anodized for long life. Hinged inverted "T" shape, with rubber-tipped feet.

Keystone Elimination—T-legs may be adjusted to allow the Cinefold to tilt forward 
up to 8°. Eases viewing and helps to compensate for image distortion.

Hinges & Handy Cranks—Hinges are manufactured of tempered steel, and 
lock positively into place. Handy Cranks are 5/16" diameter crankbolts, for quick 
assembly without tools.

Flexible Matt White for front projection. For rear projection, Cineflex and Low-Gain 
Cineflex neutral grey surfaces are available. Uniflex White viewing surface is suitable for either 
front or rear projection, and is ideal for edge blending. 

Surfaces are easily interchangeable. Sizes and formats to meet virtually any specification: 
custom and truss-style sizes available.

Heavy-Duty Legs—Extra reinforcement against front-to-back movement. Recommended 
for any screen over 71/2' x 10' (229cm x 305cm), or for any screen used with a Dress Kit.

Anti-Sway Stabilizers—Reinforce against side-to-side movement. May be mounted either 
inside or outside Cinefold leg. Recommended for screens over 101/2' x 14' (320cm x 427cm)
and for use with Dress Kits.

Joining Clamp—Join two or more screens for a really wide presentation. Clamps join 
screen frames from back, then L-shaped section wraps to front and accepts snaps on 
masking strips. Masking strips conceal hardware and provide image continuity. White 
masking for use with matt white; black for Cineflex.

Cinefold