Xerox XEScan Solution Leaflet
Customers Training Guide XEScan 1.0
Page 8
Configuring the scanner
Please make sure that the scanner is correctly configured. To find the appropriate button for
setting the configuration, hover on the button at the top of the left half of the window with the
cursor. A note appears displaying, "Scanner configuration".
1. Click the "Scanner configuration" button.
2. Click in the box labeled "Centered" if it is not already selected.
3. Under Scan speed the "Max data rate" must be set to 5 MB/s.
4. Under Scan speed the "Max. speed" must be set to max ips.
Note: The maximum data rate settings may need to be decreased if the PC does not meet the
minimum hardware requirements. Using the "Help" button in lower left of this window will open the
"Scanner Help," where you can find further information.
minimum hardware requirements. Using the "Help" button in lower left of this window will open the
"Scanner Help," where you can find further information.
Choosing the Level mode
At the left side of the "Scanner configuration" button, find a small dropdown menu.
Select in this menu whether to scan in grayscale mode or in black and white
mode. Black and white mode is indicated by a black and white square, the
grayscale square stands for the grayscale mode. We want to make a black
and white scan. Please click on the black and white square.
Choosing the Single mode
On the left side of the window, under the four preset keys, find the settings for the Scan
mode. We want to make a single scan. Please click on the "Single" radio button so it is
selected.
Choosing length and width
Click the button under "Original Size". A popup window will appear, containing common
sizes. In this case, assume the size of the original is unknown. Select "Automatic width
detection". Click the "Original Size" button again and select "Automatic height detection".
This makes it easy to scan if we do not know the original size.