Xerox XEScan Solution Installation Guide

XEScan Solution Installation Guide

11

3.  Connect the other end of the IEEE1394 cable to either one of the IEEE1394 connectors on the scanner.

4.  Attach the IEEE1394 cable to the strain relief on the back of the scanner.

5.  Connect the power cable to the rear of the scanner and connect the power cable to a dedicated Power

Receptacle.

1.  Clean the platen glass:

A.  Raise the scanner top cover.

B.  Dampen a clean, lint-free towel (Xerox Part Number 600S4372) with glass cleaning fluid (Xerox Part

Number 43P81).

C.  Wipe the glass with the towel.

D.  Visually inspect for dirt or other residue.

2.  Remove any obstructions in the paper path of the scanner.

IEEE1394