Xerox XEScan Solution User Guide

 

15

 
 
Start the program with a double click on the program icon on your desktop. The dialog Keycode Entry will 
automatically appear. In order to work with the full version of XEScan/XEScan Reflection you will have to enter 
your personal keycode. The keycode is part of your XEScan/XEScan Reflection package. 
 
The XEScan Reflection Demo does not require a keycode or a hardlock. 
 
Under Keycode enter your personal XEScan/XEScan Reflection keycode. The keycode is part of your 
XEScan/XEScan Reflection package. If you enter it manually, bear in mind it is case sensitive! The keycode 
symbols will be displayed in red until the keycode is complete and error-free. 
 

 

 
 
If you prefer entering the keycode with a keycode target, proceed as follows. Place the target in the scanner; the 
target arrow must point towards the scanner. Click then on Scan Target. Place the target in the scanner and click 
on Scan target. If the target is obliquely positioned in the scanner, an error message will appear. Place the target 
at right angles with the scanner and repeat the registration process. 
 
The keycode target is always black and white and may thus be sent by fax. However, the dark margins resulting 
e.g. from fax transmission may disrupt the target reading. In this case, cut the paper margins along the marked 
lines and repeat the process. 
 
 
 
After registration the program has to be restarted.