Xerox XEScan Solution User Guide
53
HPGL Files
If you are working with HPGL files (vector files) the tab HPGL will be available from the main window.
Pen Settings
Pen Parameters from File
With HPGL/2 files you have the option to save the pen width and pen color in the file. XEScan Reflection
determines the pens used, the defined pen widths in mm and the pen color as an RGB value from the file. These
parameters are entered in the field Pen parameters from file. They only serve as additional information and can
not be altered. If you would like to transfer one or all of the determined parameters for the print-out, activate the
menu fields Paper size as set in file / Use pen widths as defined in the file / Use pen colors as defined in the file in
the lower part of the HPGL window.
User-Defined Pen Parameters
In the block User-defined pen parameters on the right-hand side, you can alter the line thickness and RGB colors
and overwrite the values determined from the file. If you are working with a HPGL file (not HPGL/2), you have to
coordinate the pen width and the pen color in any way. These files can only be edited when the menu fields Use
pen widths as defined in the file / Use pen colors as defined in the file are not activated. The user-defined pen
parameters can be saved or loaded if required using the icons in the lower part of the HPGL window.
Change Pen Color
To change the color values click on the box to the right of the RGB value of the corresponding pen. The window