Xerox XEScan Solution User Guide
74
Rotate
The complete image can be rotated by 90°, 180° or 270° to the left. Depending on the output device paper can be
saved when using this function.
Skew
saved when using this function.
Skew
You can only click this menu item when two or three skew points have been set. Three skew points are necessary
to skew and cut the image. If you only want to adjust an obliquely scanned image, you can choose between two
and three skew points.
Mirror Area
to skew and cut the image. If you only want to adjust an obliquely scanned image, you can choose between two
and three skew points.
Mirror Area
With this function the selected region will be mirrored. If no region has been selected in the overview window, the
complete image will be mirrored.
Options
Unit
complete image will be mirrored.
Options
Unit
The unit you want to work with is set in the menu bar in the main window. In the editor, however, you can
temporarily switch between mm, inch or pixel. The current unit is displayed in the status line of the overview
window.
Scale to Gray
temporarily switch between mm, inch or pixel. The current unit is displayed in the status line of the overview
window.
Scale to Gray
For performance reasons the scanned image is displayed by default with low resolution in the mode Middle. If you
activate the menu item Scale to Gray / Median, the display will be shown in a higher resolution. This will enable
you to detect details and fine structures easily.
Hide Spy Window
activate the menu item Scale to Gray / Median, the display will be shown in a higher resolution. This will enable
you to detect details and fine structures easily.
Hide Spy Window
You can switch the spy window on or off.