Xerox Xerox 6050A Wide Format Solution User Guide
AccXES Client Tools User Guide
26
Using the Device Manager Tool
Adding a New Device
You can only create new devices with connections to network printers and
scanners.
scanners.
Select the Create a new device toolbar button.
The following Network Device dialog will appear.
Type in the Device Name and the IP Address.
Accept the information and the list of supported media types (for
printer versions 8.0 or greater) by selecting the Accept the device
parameters toolbar button. The software will get the Printer Identification
information for the added device. That information will then appear in the
Printer Identification section at the bottom of the screen. A failed message will
appear if the IP Address is incorrect for the software to connect to the printer.
parameters toolbar button. The software will get the Printer Identification
information for the added device. That information will then appear in the
Printer Identification section at the bottom of the screen. A failed message will
appear if the IP Address is incorrect for the software to connect to the printer.
Click on the Default Printer and Default Scanner columns to indicate to
which devices your PC will be connected.
which devices your PC will be connected.
Editing an Existing Network Device
Click on the listed Device Name to highlight (select) it.
Click on the edit toolbar button.
The Network Device dialog will appear with the existing Device Name and IP
Address parameters in it, which you can change.
Address parameters in it, which you can change.
Accept the information and the list of supported media types (for
printer versions 8.0 or greater) by selecting the Accept the device
parameters toolbar button. The software will get the Printer Identification
information for the edited device. The selected printer’s (AccXES Firmware)
Version number will then appear on the bottom of the screen.
parameters toolbar button. The software will get the Printer Identification
information for the edited device. The selected printer’s (AccXES Firmware)
Version number will then appear on the bottom of the screen.
The Printer Identification information and the list of supported media
types (for printer versions 8.0 or greater) will also be obtained after a network
or serial device name is selected and the Get printer ID of selected device
button is pressed.
or serial device name is selected and the Get printer ID of selected device
button is pressed.
Select the Update Printer ID of all Network Devices toolbar
button. This will update the AccXES printer identification information and the
list of supported media types (for printer versions 8.0 or greater) of each of the
Network devices in the "Available Devices" list that supports bi-directional
communication.
list of supported media types (for printer versions 8.0 or greater) of each of the
Network devices in the "Available Devices" list that supports bi-directional
communication.