Xerox Xerox Wireless Print Solutions Adapter Support & Software User Guide
Xerox
®
Wireless Print Solutions Adapter
User Guide
33
8
Diagnostics Page
To access the Diagnostics page, log into the Web Manager, then click the Diagnostics tab. The Diagnostics
page provides access to view and configure DNS settings, ping devices, view and configure networking
routes, and run traceroutes.
page provides access to view and configure DNS settings, ping devices, view and configure networking
routes, and run traceroutes.
DNS
The primary and secondary DNS addresses come from the active interface. DHCP overrides the static
addresses from the Network Interface configuration settings.
addresses from the Network Interface configuration settings.
To look up either the DNS host name or the IP address for an address, type the address or host name in the
field, then click Lookup.
field, then click Lookup.
Accessing the DNS Settings
1.
To view the current DNS name or IP address, on the Diagnostics page, click DNS.
2.
To Configure the DNS Settings, on the Diagnostics page, click DNS, begin to enter the name of a DNS
host, then click Lookup.
host, then click Lookup.
3.
To manually configure DNS servers, click the Network tab.
–
To configure for Wireless, click Wireless Network > Interface > Configuration.
–
To configure for a Wired connection, click Wired Network > Interface > Configuration.
Ping
You can use Ping to test connectivity to a remote host.
To ping a Remote Host
1.
On the Diagnostics page, click Ping.
2.
For Host, enter the IP address or host name for the Wireless Print Solutions Adapter that you want to
ping.
ping.
3.
For Count, enter the number of ping packets that the Wireless Print Solutions Adapter attempts to
send to the Host. The default number of packets is 3.
send to the Host. The default number of packets is 3.
4.
For Timeout, enter the time in seconds that the Wireless Print Solutions Adapter waits for a response
from the Host before it times out. The default time is 5 seconds.
from the Host before it times out. The default time is 5 seconds.
5.
Click Submit.