Xerox Xerox Wireless Print Solutions Adapter Support & Software Installation Guide
www.xerox.com/office/WPSAsupport
110V/220V 50/60 Hz
1.1
4.1
4.2
4.3
1.2
1
3
4
2
Select and install one of the AC plug adapters on
the 5 VDC Power Supply. Ensure that the adapter
snaps securely and fully into the base.
the 5 VDC Power Supply. Ensure that the adapter
snaps securely and fully into the base.
Plug the Ethernet cable into your printer and the
Wireless Print Solutions Adapter.
Wireless Print Solutions Adapter.
Plug in the power adapter to a wall outlet
(110 V/220 V AC) or a power strip. Wait until the
Status LED flashes amber.
(110 V/220 V AC) or a power strip. Wait until the
Status LED flashes amber.
Apply the included rubber feet or hook-and-loop
strips to the base of the unit. If you are attaching
the device to the printer, ensure that you do not
block vents or access doors.
strips to the base of the unit. If you are attaching
the device to the printer, ensure that you do not
block vents or access doors.
Installating the Hardware
Xerox
®
Wireless Print Solutions Adapter
Installation and Connection Setup Guide
installation_and_connection_setup_guide.pdf 1
8/11/15 7:53 AM