Xerox Xerox App Studio Support & Software Leaflet
6. Select the file name and select OK. Only print-ready files will be displayed for user
selection. The OK button is not selectable until a print-ready document has been
selected.
The Print from URL App tabs screen appears showing the selected settings for the
File to Print.
selected.
The Print from URL App tabs screen appears showing the selected settings for the
File to Print.
7. Review your File to Print selections.
a) To change the settings, select the Pencil icon. When done, select OK.
b) To exit the App, select the Arrow in a Box icon.
c) To get Contact Info for App support, press the Gear icon.
b) To exit the App, select the Arrow in a Box icon.
c) To get Contact Info for App support, press the Gear icon.
8. To review or change the Print Settings, select thePrint Settings tab. The Print features
you can change are visible in the tab.
a) Select the feature you want to check or change.
b) Select the setting you want to apply to your current print job.
b) Select the setting you want to apply to your current print job.
9. Select Start to begin printing.
Job status indicators appear just below the Start button. The Job Succeeded message
tells you the scan job is complete.
tells you the scan job is complete.
Note
Depending on how your Web server is configured, you may need to enable the proxy
on your device.
on your device.
Related Topics:
How To Save a New Preset for a Scanning App
Presets allow the end customer to define default values used in scanning Xerox
®
ConnectKey Apps.
Note
Presets are supported for the following Xerox
®
ConnectKey Apps:
• ConnectKey Scan to Email
• ConnectKey Scan to FTP
• ConnectKey Scan to SMB
• ConnectKey Scan to USB
• ConnectKey Scan to Multi-Destination
1. Select the icon for the installed scanning ConnectKey App at the device control panel.
2-105
Xerox
®
App Studio
Reseller How To and Troubleshooting Guide
How To