Xerox Xerox® 4110 Copier Leaflet
Title
Tab Jobs
Date
May 2007
Product
Xerox 4110 / 4590 Copier Printer
“How Do I?” guide for Operators
Page 1 of 6
Copying on Tab Stock (not printing from network).
To copy on tab stock:
1. Select the method to use (Copy Only, Copy & Save, Save Only).
2. Select
2. Select
the
Output Format tab and then Tab Margin Shift.
3. Select
Shift to tab to copy only the tab area of the original or Shift All to copy the entire original to the
tab stock and select Save.
4. The Output Format tab reappears. Select Output Orientation, Face Down and then Save.
5. Load the original as shown on the User Interface, select the tray where the tab stock is located and select
5. Load the original as shown on the User Interface, select the tray where the tab stock is located and select
Save.
6. Ensure the tab stock is loaded and the media settings are correct. Press Start to print.
More? In the User Guide, check the Copy chapter for Tab Margin Shift.
How to run jobs with pre cut tabs
The 4110 EPS is able to print on pre cut tab stock - with the following caveats:
1. The system does not have automatic job recovery for ordered stocks.
•
This will need to be handled manually by the user.
2. The system does not support automatic kick out of unused tabs.
•
This can be handled within the application or manually.
3. Currently, the 4110/4590 EPS DocuSP GUI and drivers do not directly support the PreCutTab media type.
•
The workaround is to use the Full Cut Tab or custom media types.
•
This may cause issues for applications that explicitly call out PreCutTab media.
How to Print to Tabs with the Built-in PCL Driver
Set up the 4110 for 8.5x11 tabs in Tray 3, and then do the following:
1. Open the 8.5x11 document containing the tab information.
2. Select [File] [Print].
3. Select the 4110 Built-in Controller PCL version 3.0.
4. Select
2. Select [File] [Print].
3. Select the 4110 Built-in Controller PCL version 3.0.
4. Select
[Properties]
5. On the [Paper/Output] tab, set the following:
- [Paper Size] = 8.5x11"
- [Output Size] = 8.5x11"
6. Select the [Tray/Layout] tab, set the following:
- [Paper Source] = Tray 3 (or tray with 8.5x11 tab stock)
7. Select [Detailed Settings] tab
8. In the [Items] window, scroll to the bottom and select "Tab Margin Shift".
9. Under [Setting for:] select "On".
10. Select [OK].
- [Paper Size] = 8.5x11"
- [Output Size] = 8.5x11"
6. Select the [Tray/Layout] tab, set the following:
- [Paper Source] = Tray 3 (or tray with 8.5x11 tab stock)
7. Select [Detailed Settings] tab
8. In the [Items] window, scroll to the bottom and select "Tab Margin Shift".
9. Under [Setting for:] select "On".
10. Select [OK].
RESULTS: The tab information prints centered on the tab.