Xerox Paris, a document system Support & Software User Guide
Chapter 1
The PARIS Spooler32 Technical Manual
30
(B) PCL printers (no permanent storage)
•
If you are using a PCL printer with no permanent storage facilities
that is
NOT being shared with other applications
you would choose ‘Never’.
However, if the printer is turned off or reset, you would have to modify the
printer definition and select the ‘Reset at start of next job’
printer definition and select the ‘Reset at start of next job’
checkbox. This
causes the Spooler to reset the resources at the beginning of the next job.
Once the resources are sent, the ‘Reset at start of next job’
Once the resources are sent, the ‘Reset at start of next job’
option is
canceled.
•
If you are using a PCL printer with no permanent storage facilities
that IS
being shared with other applications
you would choose ‘At Job Start’.
This will cause the Spooler to reset the resources at the start of each job (as
the resources are overwritten if another application sends output to the
printer).
the resources are overwritten if another application sends output to the
printer).
•
If you are using a PCL printer with no permanent storage facilities
as a
dedicated printer
you would choose ‘At System Start’ to reset the
resources each time the system is started.
(C) Postscript printers (no permanent storage)
If you are using a Postscript printer with no permanent storage facilities the
option chosen will be irrelevant as PARIS must send all the resources required
for a job at the beginning of each job.
option chosen will be irrelevant as PARIS must send all the resources required
for a job at the beginning of each job.