Xerox Paris, a document system Support & Software User Guide

Using Novell Print Queues with PARIS

Once the queues have been created and user access has been setup, the queues
are now available for PARIS use.

To send PARIS output to a queue, when defining the settings for a printer
setup, enter the queue name in the ‘Output To’ box for a print destination.

File Server Access

If PARIS resources have been loaded onto the file server, the login user name
used at a workstation running PARIS must have:

1. 

Access to the file server disk containing the resources, and

2. 

A valid drive mapping to the file server disk containing the resources.

For example, if PARIS has been installed to a file server but the user login
‘XLPRINT’ does not have access to that drive, then PARIS will fail to run.

Single Server Access

The current PARIS Novell support does not support multiple server networks.
This does not mean PARIS will not run in a multiple server network, but that
PARIS input or output queues must reside on the server that the workstation is
currently logged in to.

Queues can exist on more than one server but PARIS can only see the queues
on the current server.

 

When Novell is chosen as the input source there are additional options available
by which an environment can be selected. Refer to the section
‘Environment File Selection’ on page 80.