Xerox Paris, a document system Support & Software User Guide
Using Local Text Block Events
Chapter 7:Using Events
156
The Paris Designer User Manual
Adding a Select Device Features Event
The following takes you through the process of adding a text block Select Device
Features event to an environment. Before this can be done, device specific features
must be added to the Paris system and a thorough understanding of the use of the
features is required. This is described in Appendix D, ‘Device Specific Features in
the Paris System’ of the Paris Designer Reference Manual.
Features event to an environment. Before this can be done, device specific features
must be added to the Paris system and a thorough understanding of the use of the
features is required. This is described in Appendix D, ‘Device Specific Features in
the Paris System’ of the Paris Designer Reference Manual.
To add a Select Device Feature event:
1.
Display the list of event types in the View/Change Event List dialogue as
described on page 138, and choose Select Device Features from the list.
described on page 138, and choose Select Device Features from the list.
2.
Click on the Add button to display the Select Device Features dialogue.
3.
Choose the required feature (added as described in Appendix D of the Paris
Designer Reference Manual).
Designer Reference Manual).
4.
Click on the Add button to add the event and display it in the Device Specific
Features list.
Features list.
5.
Set the test conditions as required, then choose the OK button. The added
event will be displayed in the View/Change Event List dialogue.
event will be displayed in the View/Change Event List dialogue.
NOTE:
Refer to the Using Tests in this chapter for information regarding setting up test
conditions.
conditions.
In Chapter 7 of the Paris Designer Reference Manual detailed information on
each test option and its use is given under the section ‘Using Tests’.
each test option and its use is given under the section ‘Using Tests’.