Xerox Paris, a document system Support & Software User Guide
Chapter 2
84
The Paris Spooler Technical Manual
Byte Settings
Byte Settings must be set to match those of the host computer. Ask your
maintenance engineering staff what settings are required.
maintenance engineering staff what settings are required.
Handshaking
The options available in the Hardware Handshaking drop-down menu are None;
DTR Only, RTS Only and DTR and RTS.
DTR Only, RTS Only and DTR and RTS.
Software Handshaking
The Software Handshaking checkbox is selected by default.
#
WARNING!
This option should NOT be de-selected unless the host sends so slowly that
overruns cannot occur.
overruns cannot occur.
Page Eject
The page eject options control whether or not a page is ejected from the printer
after a specified number of seconds.
after a specified number of seconds.
While this option is useful when the last page is not automatically ejected from the
laser printer, it can cause problems if the serial link is broken in the middle of a
print job, in this case the half completed page will be ejected before the remaining
data is received.
laser printer, it can cause problems if the serial link is broken in the middle of a
print job, in this case the half completed page will be ejected before the remaining
data is received.