Xerox Document Workstation with PlotWorks Support & Software User Guide
4-70 • PlotWorks User Guide
•
Make overlays relative to main image: Select this check box to scale or
rotate overlays in relation to the main image.
rotate overlays in relation to the main image.
Nesting Options Tab
Nesting enables printing several images on one piece of medium to prevent media
waste. For example, if D-size media is loaded, you can nest two C-size images so
that they print side by side on D-size media.
waste. For example, if D-size media is loaded, you can nest two C-size images so
that they print side by side on D-size media.
The Job Editor select the medium that it can print most drawings on by default. If
more than one media available allows the same number of drawings, the Job
Editor uses the one that wastes the least media.
more than one media available allows the same number of drawings, the Job
Editor uses the one that wastes the least media.
Fig 4.41
Example of
a nested
print job
“A” size
“B” size image
2 images nested on
“C” sized media
image
To nest images:
1.
Open the Setup menu.
2.
Select Preferences.
3.
Click on the Nesting Options tab.
4.
Select Enable nesting.
5.
Enter the Maximum images to nest (up to 100). This specifies when to start
a new nested job. The default maximum nest length is 36 inches. To change
this value, see page 8-19.
a new nested job. The default maximum nest length is 36 inches. To change
this value, see page 8-19.
6.
In the Border between nested images field, enter the amount of margin
space you want between nested images.
space you want between nested images.
7.
Click OK.