Xerox Document Workstation with PlotWorks Support & Software User Guide
8-10 • PlotWorks User Guide
Setting Up the Printer Interface
The Printer Interface is usually ready for use immediately after installation. When
using a socket printer, those printers that require a TCP/IP address, some
additional steps are required. Socket printers include the AccXES and the Océ
Power Logic controller driven printers. Please refer to Socket Printers” on page 8-
67, for more information on setting up the Printer Interface for these printers.
using a socket printer, those printers that require a TCP/IP address, some
additional steps are required. Socket printers include the AccXES and the Océ
Power Logic controller driven printers. Please refer to Socket Printers” on page 8-
67, for more information on setting up the Printer Interface for these printers.
The Printer Interface contains a pre configured media inventory list. You do not
have to add media to the inventory list before sending jobs to the printer. However
you may want to change certain parameters and settings to fit your requirements.
have to add media to the inventory list before sending jobs to the printer. However
you may want to change certain parameters and settings to fit your requirements.
The following sections describe options available in the Printer Interface. Default
settings are provided for most options.
settings are provided for most options.
Set General Printing Options
The General Configuration dialog box is used to select options available for all
printers.
printers.
When General Printing Options are changed, the Printer Interface may close and
reopen registering the changes.
reopen registering the changes.
To set General Printing Options:
1.
Open the Printer Interface, if it is not already open.
2.
From the Setup menu select General Configuration....
3.
Edit the desired fields in the General Configuration dialog box.