Xerox Document Workstation with PlotWorks Support & Software User Guide
8-76 • PlotWorks User Guide
Windows Printers
The Windows Printer Interface, shown in Fig. E.14, supports both color and
monochrome printers. The Status Box provides the following notice only:
monochrome printers. The Status Box provides the following notice only:
•
Add media or media mismatch (causes an audible warning beep)
The Windows Printer Diagram resembles a laser printer with four media trays.
Windows printers do not generally report what percentage of paper has been used,
therefore the Printer Interface displays the trays as always full.
Windows printers do not generally report what percentage of paper has been used,
therefore the Printer Interface displays the trays as always full.
8.54
Windows
Printer
Interface
(color)
Selecting a Windows Printer
With the Printer Interface open, you can select the desired printer from a list of
printers installed on the network, if any.
printers installed on the network, if any.
1.
From the Setup menu, select Device Specific Options.
2.
In the Device Specific Options dialog, use the Printer name: pull-down list
and select the desired Windows printer.
and select the desired Windows printer.
3.
Click OK. Remember to set up the media inventory if this is the first time us-
ing this printer.
ing this printer.
This makes it easy to switch between network printers if one is busy.