Xerox Document Workstation with PlotWorks Support & Software User Guide
Chapter 11-14 • PlotWorks User Guide
Folding Options
The following options may be available for your folder:
Width
This option is used to specify the final folded package width. If the desired final
folded package size is 210mm, you would specify 210 as the fold width.
folded package size is 210mm, you would specify 210 as the fold width.
Fig 11.5
Example
showing
the
location of
fold lines
when a
width of
210 mm is
selected
and
Margin
This option is used to specify a fold margin. Fold margins, often called “finishing”
or “stripping” margins, are used when you want one folded area to be wider than
the other areas This is useful when you want to reinforce or punch the fold for
storage in a binder or hanging file.
or “stripping” margins, are used when you want one folded area to be wider than
the other areas This is useful when you want to reinforce or punch the fold for
storage in a binder or hanging file.
The amount specified for the Margin is included in the Width. For example, if you
want a final piece width of 210mm but you want a 25mm finishing margin (for
punching or reinforcing), specify a fold margin of 210 and a finishing margin of
25. PlotWorks will subtract 25 from 210, leaving a 185mm width and a 25mm
finishing margin (see Fig. 11.6).
want a final piece width of 210mm but you want a 25mm finishing margin (for
punching or reinforcing), specify a fold margin of 210 and a finishing margin of
25. PlotWorks will subtract 25 from 210, leaving a 185mm width and a 25mm
finishing margin (see Fig. 11.6).