Xerox Document Workstation with PlotWorks Support & Software User Guide
E-28 • PlotWorks User Guide
5.
Click OK again.
Output Job Tickets
This section assumes that the PlotWorks Client is installed and that you can create
and output job ticket.
and output job ticket.
1.
Open the PlotWorks Client and create or open a job ticket.
2.
Under the Setup menu, choose Configure Destinations. The following
dialog box appears:
dialog box appears:
Fig. E.19
Configure
Destin-
ation
dialog box
3.
Enter the name of the service bureau connection in the Destination Name
field. This creates an entry under the Output menu.
field. This creates an entry under the Output menu.
4.
In the Destination Path field, enter the UNC path of the shared folder to
which the files will be sent.
which the files will be sent.
5.
Under Options, select Use Dial-up Networking to Connect to Destination.
6.
In the Dial-up Configuration box, select the Phonebook Entry of the
Service Bureau, enter your User Account (username) and Password, if
required. The service bureau can provide this information.
Service Bureau, enter your User Account (username) and Password, if
required. The service bureau can provide this information.
Your user account name must be the same as your Windows/Network logon
username if you are using Windows 95.
username if you are using Windows 95.
7.
Under Destination Type, select Network Polling (unless the service bureau
specifies Job Queue).
specifies Job Queue).
8.
Click OK.
9.
Send the job by clicking Output Job and selecting the destination name
entered in step 3.
entered in step 3.