Xerox 4213 MICR MRP User Guide
SPECIAL FEATURES
Data Monitor mode
The interface card provides an online incoming data monitoring
capability for diagnostic purposes. This mode is activated when
the Data Monitor entry string is detected.
capability for diagnostic purposes. This mode is activated when
the Data Monitor entry string is detected.
The command is:
@T1,
It remains active until the exit string is detected.
The command is:
@T1,
While in this mode, XCTO converts each data byte received from
the host into a two-byte ISO6937 string representing the hex
value of the byte received. It is then formatted and printed.
the host into a two-byte ISO6937 string representing the hex
value of the byte received. It is then formatted and printed.
An example of a part of a data dump is shown in figure 3-8.
XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE
3–25