Xerox 4213 MICR MRP User Guide
SPECIAL FEATURES
Create translate table
This command allows you to create a customised translate table
in non-volatile memory (NVRAM). The translate table is initialised
based on the internal code page 500 (see appendix A) and may
be modified by sending modify translate table commands.
in non-volatile memory (NVRAM). The translate table is initialised
based on the internal code page 500 (see appendix A) and may
be modified by sending modify translate table commands.
Notes:
Creating a translate table automatically selects it as the active
translate table.
translate table.
If 8 tables have already been created (that is the total of all tables
created by Y71, Y76 and Y81), the user cannot create any more
tables and an error is reported. The previously selected table
remains active.
created by Y71, Y76 and Y81), the user cannot create any more
tables and an error is reported. The previously selected table
remains active.
Command format
@Y71,<table number>@
@
The interface escape character
Y71
The command that creates the translate table
, (comma)
The command delimiter
<table
number>
The number that identifies the translate table in
the range 1 to 8.
the range 1 to 8.
@
The interface escape character
Delete translate table
This command deletes a specified translate table.
Command format:
@Y72,<table number>@
@
The interface escape character
Y72
The command that deletes the translate table
, (comma)
The command delimiter
<table
number>
The number that identifies the translate table in
the range 1 to 8.
the range 1 to 8.
@
The interface escape character
XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE
3–31