Xerox 4213 MICR MRP User Guide
CONFIGURATION AND SYSGEN SAMPLES
Twinax printers
Three of the possible line configurations are shown in this
section.
section.
Line configurations
XCTO supports two types of twinax environments, SCS and DCA
in word processing. The next three illustrations show possible
configurations for both environments using IBM 5224/5225/
5256/5219 attachments.
in word processing. The next three illustrations show possible
configurations for both environments using IBM 5224/5225/
5256/5219 attachments.
•
Configuration 1 shows an IBM 5224, 5225 or 5256 and an
IBM 5219. Note that only one of the three printers shown at
address 0 and 1 can actually be attached, and the system
configuration must reflect this.
IBM 5219. Note that only one of the three printers shown at
address 0 and 1 can actually be attached, and the system
configuration must reflect this.
•
Configuration 2 shows Xerox printers replacing the IBM
printers. In this case no change in the IBM system
configuration is required as long as the Xerox printer
emulates the printer it replaces.
printers. In this case no change in the IBM system
configuration is required as long as the Xerox printer
emulates the printer it replaces.
•
Configuration 3 shows the Xerox printer operating in the
same system as the IBM printers. A Xerox printer has been
added to the system, so the IBM host configuration has to
be modified to reflect this addition.
same system as the IBM printers. A Xerox printer has been
added to the system, so the IBM host configuration has to
be modified to reflect this addition.
XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE
7–11