Xerox 4215 MICR MRP User Guide

Page of 54
NOTICES
Laser safety
Your printer complies with appropriate safety standards.
Specifically regarding lasers, the equipment complies with laser
product performance standards set by governmental,
international and national agencies as a Class 1 laser product.  It
does not emit hazardous light; the beam is totally enclosed
during all phases of customer operation and maintenance.
WARNING:   Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
Be aware of all labels that warn you against removing panels or
covers.  See the example below of a label located behind the
front cover, below the on/off switch.
DANGER - Invisible laser radiation
when open and interlock
defeated for service.
AVOID DIRECT EXPOSURE TO
BEAM
Instructions for safe service are
in SERVICE MANUAL.
These laser warning labels are placed on panels that cover areas
that are not operator serviceable.  These panels are not to be
removed.
Operational safety
Your Xerox equipment and supplies are designed and tested to
meet strict safety requirements.  These include safety agency
examination, approval, and compliance with established
environmental standards.
Attention to the following notes ensures the continued safe
operation of your equipment.
Do this
Always connect equipment to a properly grounded power source
receptacle.  If in doubt, have the receptacle checked by a
qualified electrician.
WARNING:   Improper connection of the equipment grounding
conductor can result in electrical shock.
Always place equipment on a floor with adequate strength for
the weight of the machine.
Always have your qualified service representative move or
relocate the equipment.
Always use materials and supplies specifically designed for your
Xerox equipment.
iv
XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE