Xerox 4215 MICR MRP Installation Guide

NOTICES

These laser warning labels are placed on panels that cover areas
that are not operator serviceable.  These panels are not to be
removed.

Your Xerox equipment and supplies are designed and tested to
meet strict safety requirements.  These include safety agency
examination, approval, and compliance with established
environmental standards.

Attention to the following notes ensures the continued safe
operation of your equipment.

Always connect equipment to a properly grounded power source
receptacle.  If in doubt, have the receptacle checked by a
qualified electrician.

WARNING:  Improper connection of the equipment grounding
conductor can result in electrical shock. 

Always place equipment on a floor or table with adequate
strength for the weight of the machine.

Always have at least two people move or relocate the
equipment.

Always use materials and supplies specifically designed for your
Xerox equipment.

WARNING:  Use of unsuitable materials may result in poor
performance and can possibly create a hazardous condition.

Never attempt any maintenance function that is not specifically
described in this document.

Never remove any covers or guards that are fastened with screws
unless otherwise instructed.  You cannot service areas within
these covers.

Never override or “cheat” electrical or mechanical devices.

Never operate the equipment if you notice unusual noises or
odors.  Disconnect the power cord from the power source
receptacle and call Xerox service to correct the problem.

U.S. only:  If you need any additional safety information
concerning the equipment or Xerox supplied materials, call the
following toll-free number:  1-800-828-6571.

Listed by Underwriters Laboratories, UL1950 (UL).  Meets CSA
standards, C22.2 NO 950 (CSA).

Meets the British Standards Institution, IEC950 (BSI).

XEROX 4219/MRP AND 4215/MRP INSTALLATION PLANNING GUIDE

v