Xerox 4215 MICR MRP Administrator's Guide
<
cut top 2"
cut 1">
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
2-28
Using the Control Panel
SET INTERFACE MENU ITEM
DESCRIPTIONS
DESCRIPTIONS
Your printer comes with twinax or coax,
parallel Centronics and serial (RS-232C)
interfaces enabled. Use this menu to configure
the interfaces to meet the needs of your
operation.
parallel Centronics and serial (RS-232C)
interfaces enabled. Use this menu to configure
the interfaces to meet the needs of your
operation.
Serial and parallel Centronics communication
use special communication parameters. Refer to
your host computer software manuals for details
and make sure your computer and your printer
are using identical settings for each of the
serial and parallel Centronics parameters. In
most cases, you can use the factory default
settings because they are suitable for most
office situations.
use special communication parameters. Refer to
your host computer software manuals for details
and make sure your computer and your printer
are using identical settings for each of the
serial and parallel Centronics parameters. In
most cases, you can use the factory default
settings because they are suitable for most
office situations.
Parallel, Serial, and Other I/O (Twinax or Coax)
The parallel, serial and Other I/O (twinax or
coax) interface menu items have two common
options:
coax) interface menu items have two common
options:
F
Enable Interface (I/F)
F
Printer Type
The serial menu item has an additional option:
Serial Setup.
Serial Setup.
Enable Interface (I/F) All interfaces
(parallel, serial, and Other I/O) are enabled
(*
(parallel, serial, and Other I/O) are enabled
(*
On
) when you receive your printer. If you
change this setting to Off, the selected
interface is disabled.
interface is disabled.
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer