Xerox 4215 MICR MRP Administrator's Guide
<
cut top 2"
cut 1">
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Operator Guide
2-41
PRINTER CONFIGURATION EXAMPLES
The examples provided in this section
illustrate the step-by-step procedures for
changing the system configuration using the
control panel.
illustrate the step-by-step procedures for
changing the system configuration using the
control panel.
NOTE: For configuration of the twinax/coax
interfaces and IBM printer emulations, use the
Xerox Configuration and Resource and Utility
which is described in the Xerox Twinax Command
Reference and the Xerox Coax Command Reference.
interfaces and IBM printer emulations, use the
Xerox Configuration and Resource and Utility
which is described in the Xerox Twinax Command
Reference and the Xerox Coax Command Reference.
NOTE: The following examples assume the printer
is currently set to factory default
configurations. Pressing Online and Help while
powering up the printer returns the printer to
its factory defaults.
is currently set to factory default
configurations. Pressing Online and Help while
powering up the printer returns the printer to
its factory defaults.
F
Printer configuration examples:
A.
Settings for the default paper tray and
the automatic tray swap.
the automatic tray swap.
B.
Turning off the Start Page
C.
Setting the default font for PCL 5
mode.
mode.
D.
Setting the communications port to
priority Other I/O.
priority Other I/O.
F
Interface configuration examples :
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer