Xerox XCounter Page Accounting Support & Software User Guide
Mar 2001
5/30/2001
XCOUNTER FOR NOVELL USER REFERENCE MANUAL
26
•
From the XControl graphic interface select “Novell Directory Services” Select
the context where the NDPS Manager is located and then select the NDPS
Manager. Press the “
the context where the NDPS Manager is located and then select the NDPS
Manager. Press the “
X
” button on the tool bar.
•
An “XCounter NDPS configuration” window will appear. Select the “Popup” tab
and the Popup configuration window will appear.
and the Popup configuration window will appear.
•
Select the “Window type” and make any other required modifications or option
changes then “Apply” the changes. Please refer to the section “Server
configuration” for more detailed information.
changes then “Apply” the changes. Please refer to the section “Server
configuration” for more detailed information.
Note: The XCounter program provides numerous printer and server configuration
options that can be set to meet custom requirements. Please refer to the sections
“Server Configuration” and “Printer Configuration” for more detailed information on
these options.
options that can be set to meet custom requirements. Please refer to the sections
“Server Configuration” and “Printer Configuration” for more detailed information on
these options.
•
The printer agent configuration specifies whether or not the XPopup client is
enabled. This means that only printers that require the XPopup client need to
be configured. Repeat the following procedure to enable additional printer
agents for the XPopup client:
enabled. This means that only printers that require the XPopup client need to
be configured. Repeat the following procedure to enable additional printer
agents for the XPopup client: