Xerox Global Print Driver Support & Software Installation Guide

Xerox® Global Print Driver® Installation Guide

Windows 8 & Windows 8.1

1.  Click Start  Search  Devices and Printers.
2.  Select Add a Printer.
3.  Select Add a local printer.
4.  Select Create a new port  Standard TCP/IP Port  Next.
5.  Select TCP/IP Device in the Device type menu.
6.  Enter the host name or IP address.
7.  Clear the Query the printer checkbox. Select Next.
8.  If the Additional Port Information Required box appears, select Next.
9.  Select Have Disk from the Manufacturer/Printers window.
10.  Click Browse and select the printer's .inf file.
11.  Click Open  OK.
12.  Select the printer from the list. Select Next.
13.  Enter the printer name.
14.  Select if you want to use the printer as the default printer. Select Next.
15.  Select if you want to print a test page.
16.  Select Finish

Installation Using Point and Print

To get the server ready for Point and Print, follow the installation steps in the Add Print Wizard

section.
Note: The printer must be shared in order for Point and Print to function.

This procedure assumes that a Xerox® printer on a network server has been installed with

the appropriate Global print Driver prior to performing Point and Print.

1. At the client workstation, access the desired print server using information provided by the IT

department.

2. Select the print queue from the print server.
3. Do one of the following:

a. Right-click the printer icon and select Connect.
b. Click the printer icon. Drag and drop the printer icon on the Printers folder.

Notes:
If you receive a message asking if you want to continue, select Yes.

The server driver is set by default to the server operating system language. The client driver is set

by default to the client operating system language.

You can change a printer to shared status by right-clicking on the printer, select Sharing, fill in the

Share name on the Sharing tab.