Xerox WorkCentre 3025 User Guide
CentreWare® Internet Services
Xerox® WorkCentre® 3025
User Guide
35
Configuring Wi-Fi Direct
TM
using CentreWare Internet Services
Wi-Fi Direct
TM
allows you to enable your wireless devices, such as notebooks, mobile phones and PCs to
establish wireless connectivity without the need for a wireless router, access point, or Wi-Fi hot spots.
1.
At your workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
Address Bar.
2.
Press Enter.
3.
Select Properties.
4.
If prompted, enter the admin for the ID and 1111 for the Password, and select Login. Select
Properties.
Properties.
5.
In the Network Settings link, select the Wi-Fi link. Then select the Wi-Fi Direct
TM
link below that.
6.
Select On for Wi-Fi Direct
TM
.
7.
Enter the following:
•
Device Name
•
IP Address
•
Activate or Deactivate the Group Owner
•
Network Key
8.
Select Apply and then OK.
Setting the Ethernet Speed Using CentreWare Internet Services
1.
At your workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
Address Bar.
2.
Press Enter.
3.
Select Properties.
4.
If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.
5.
Select Properties.
6.
In the Network Settings link select the General link.
7.
Select one of the following speeds from the Ethernet Speed drop-down menu:
•
Automatic
•
10 Mbps (Half Duplex)
•
10 Mbps (Full Duplex)
•
100 Mbps (Half Duplex)
•
100 Mbps (Full Duplex)
8.
Select on Apply to save the changes.
The change to Ethernet Speed
rate will take effect after System Reboot screen displays.
9.
Select OK.
10. When the Acknowledgement screen displays, select OK.
11. Reboot the machine.