Xerox Phaser 7500 User Guide

Network Basics

Phaser 7500 Color Printer

User Guide

37

Other Methods of Installation

Your printer can also be installed on a network using one of these methods:

•

Microsoft TCP/IP Protocol

•

Microsoft IPP Port

You can monitor or configure your printer with CentreWare IS and a Web browser if your printer is 
connected to a network with the TCP/IP protocol enabled.

Note:

The CentreWare methods are not discussed in this section. See 

For Windows XP, select 

Classic Look or the Windows XP procedures will not match the steps below. To 

select Classic Look, click 

Start > Control Panel > Taskbar and Start Menu. Select the Start Menu tab, 

then select the 

Classic Start menu. Click OK. 

To verify that TCP/IP is installed:

1. Right-click the 

My Network Places icon on the desktop, then click Properties.

2. Right-click 

Local Area Connection, then click Properties.

3. Click the 

General tab to verify that Internet Protocol (TCP/IP) is installed.

•

If the Internet Protocol (TCP/IP) box is checked, the software is installed.

•

If the Internet Protocol (TCP/IP) box is not checked, the software is not installed. Install TCP/IP 
software using the documentation provided by Microsoft, and then return to this document.

To add the printer:

1. On the desktop click 

Start, then click Settings.

2. Select one of these options:

•

Windows 2000: Click Printers, double-click Add Printer to launch the Add Printer Wizard, then 
click 

Next. 

•

Windows XP or Windows Server 2003: Click Printers and Faxes. Double-click Add Printer to 
launch the Add Printer Wizard, then click 

Next. 

3. Click the 

Local Printer button, then click Next.

4. Click the 

Create a New Port button.

5. Select 

Standard TCP/IP Port from the New Port Type drop-down menu, then click Next.

6. Click 

Next.

7. Enter the IP Address of the printer you want to use in the 

Printer Name or IP Address edit box. 

Click 

Next.

8. Select one of these options:

•

Click 

Finish in the Confirmation window if the data is correct.

•

Click  the 

Back button to correct the data if it is incorrect, then click Finish in the Confirmation 

window.