Manualsbrain.com
  1. Manuals
  2. Brands
  3. Xerox
  4. Phaser 7100
  5. Administrator's Guide

Xerox Phaser 7100 Administrator's Guide

Download
Page of 90
Network Configuration
Phaser 7100 Color Printer
System Administrator Guide
20
TCP/IP
Transmission Control Protocol (TCP) and Internet Protocol (IP) are two protocols within the Internet 
Protocol Suite. IP manages the transmission of messages from one computer to another and TCP 
manages the actual end-to-end connections.
Note:
You can configure IPv4 settings at the printer control panel or through CentreWare Internet 
Services. You can only configure IPv6 through CentreWare Internet Services.
Enabling TCP/IP
Note:
By default, TCP/IP is enabled. If you disable TCP/IP, you must enable it at the printer control 
panel before you accessing CentreWare Internet Services.
1.
At the printer control panel, press Menu.
2.
Navigate to Admin Menu, then press OK.
3.
Navigate to Network / Port > TCP/IP Settings > IP Mode.
4.
Select IPv4 Mode, IPv6, or Dual Stack to enable both IPv4 and IPv6, then press OK.
Configuring TCP/IP Settings at the Control Panel
Manually Configuring an IPv4 Network Address
1.
At the printer control panel, press Menu.
2.
Navigate to Admin Menu, then press OK.
3.
Navigate to Network / Port > TCP/IP.
4.
Navigate to IPv4 Settings, then press OK.
5.
Navigate to Get IP Address > Static, then press OK.
6.
Navigate to IPv4 - IP Address.
7.
Use the arrow buttons to type the static IP address, then press OK.
8.
Navigate to IPv4 - Subnet Mask.
9.
Use the arrow buttons to type the subnet mask, then press OK.
10. Navigate to IPv4 - Gateway Address.
11. Use the arrow keys to type the gateway mask, then press OK.
Manually Configuring an IPv6 Network Address
1.
At the printer control panel, press Menu.
2.
Navigate to Admin Menu, then press OK.
3.
Navigate to Network / Port > TCP/IP > IP Mode.
4.
Navigate to IPv6 Settings.
5.
Press Enabled, then press OK.