Xerox Phaser 7100 Administrator's Guide
Network Configuration
Phaser 7100 Color Printer
System Administrator Guide
System Administrator Guide
32
LDAP
Lightweight Directory Access Protocol (LDAP) is a protocol used to process queries and updates to an
information directory, also known as an LDAP directory, stored on an external server. LDAP directories
are heavily optimized for read performance. Use this page to define how the printer retrieves user
information from an LDAP directory.
information directory, also known as an LDAP directory, stored on an external server. LDAP directories
are heavily optimized for read performance. Use this page to define how the printer retrieves user
information from an LDAP directory.
Configuring LDAP/LDAPS Server Settings
1.
In CentreWare Internet Services, click Properties > Connectivity > Protocols > LDAP > LDAP
Server.
Server.
2.
Under Server Information, type the appropriately formatted main and backup LDAP server
addresses and port numbers. The default port number is 389.
addresses and port numbers. The default port number is 389.
Optional Information
1.
Type the search directory root path in the Search Directory Root field by using the Base DN
format.
format.
Note:
For details on Base DN formatting, refer to the
RFC 2849 - LDAP Data Interchange Format
(LDIF) Technical Specification on the IETF website.
2.
Type Login Name and Password, as needed. Retype the password to confirm.
3.
If the primary LDAP server is connected to additional servers, select LDAP Referrals to include
those LDAP servers in your searches.
those LDAP servers in your searches.
4.
Type the maximum number of consecutive LDAP referrals in the LDAP Referral Hop Limit field.
5.
Click Apply.
Defining User Mappings
LDAP servers provide different results to search queries depending on how user data is mapped. Editing
the mapping allows you to fine-tune server search results.
1.
the mapping allows you to fine-tune server search results.
1.
In CentreWare Internet Services, click Properties > Connectivity > Protocols > LDAP > LDAP User
Mappings.
Mappings.
2.
To send a test query, under Search, type the name of the user you want to search for in the User
Name field, then click Search.
If a match occurs, the user information is displayed.
Name field, then click Search.
If a match occurs, the user information is displayed.
3.
Use the drop-down menus under Imported Heading to remap fields as needed.
Note:
Headings are defined by the LDAP server’s schema.
Configure Authentication for LDAP
1.
In CentreWare Internet Services, click Properties > Connectivity > Protocols > LDAP > LDAP
Authentication.
Authentication.
2.
Select Direct Authentication or Authentication of User Attributes next to Authentication
Method.
Method.