Xerox WorkCentre 3335/3345 Administrator's Guide
Network Connectivity
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
23
System Administrator Guide
Configuring DNS Settings at the Printer Control Panel
Domain Name System (DNS) is a system that maps host names to IP addresses.
1.
1.
At the printer control panel, press the Machine Status button.
2.
Touch Network Settings > TCP/IP Settings.
3.
Touch DNS Configuration.
a.
Touch Host Name.
b.
Type a host name.
c.
Touch OK.
Note:
For the following steps, if DHCP is enabled, the Domain Name and DNS Servers cannot be
set manually.
d.
d.
Touch Domain Name, then touch the Requested Domain Name field. To type the fully
qualified domain name, use the touch screen keypad.
e.
Touch OK.
4.
Touch DNS Servers.
a.
Touch Primary DNS Server, then type the server address.
b.
Touch Alternate DNS Server #1, then type the server address.
c.
Touch Alternate DNS Server #2, then type the server address.
d.
Touch OK.
5.
To close the screen, touch X.
Configuring IP Settings in Xerox
®
CentreWare
®
Internet Services
If your printer has a valid network address, you can configure TCP/IP settings in Xerox
®
CentreWare
®
Internet Services. For details, see
Assigning a Network Address
on page 15.
Configuring IPv4
You can use IPv4 or IPv6 in addition to or in place of the other.
1.
1.
In Xerox
®
CentreWare
®
Internet Services, click
Properties > Connectivity > Protocols.
2.
Click TCP/IP.
3.
For Protocol, select Enabled.
4.
For Host Name, type a unique name for your printer.
5.
For IP Address Resolution, select an option. Fields that appear depend on the option that you select.
−
STATIC: This option disables dynamic addressing and allows you to type a static IP address.
Type the Machine IP Address, Subnet Mask, and Gateway Address.
−
BOOTP: This option allows the printer to obtain an IP address from a BOOTP server that does
not respond to DHCP requests.
−
DHCP: This option allows your DHCP server to assign an IP address to the printer. Dynamic DNS
Registration is enabled.