Xerox WorkCentre 3335/3345 Administrator's Guide
Network Connectivity
30
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
System Administrator Guide
Raw TCP/IP Printing
Raw TCP/IP is used to open a TCP socket-level connection over Port 9100, and stream a print-ready file
to the printer input buffer. It then closes the connection either after sensing an End Of Job character in
the PDL or after expiration of a preset timeout value. Port 9100 does not require an LPR request from the
computer or the use of an LPD running on the printer. Raw TCP/IP printing is selected in Windows as the
Standard TCP/IP port.
Configuring Raw TCP/IP Settings
1.
In Xerox
®
CentreWare
®
Internet Services, click
Properties > Connectivity > Protocols.
2.
Click Raw TCP/IP Printing.
3.
For Protocol, select Enable.
4.
Ensure that Port Number is set to 9100.
5.
Click Apply.
Enabling Raw TCP/IP Printing at the Control Panel
1.
At the printer control panel, press the Machine Status button.
2.
Touch Network Settings > Advanced Settings.
3.
Touch Raw TCP/IP-Printing.
4.
Touch Enable.
5.
Ensure that Port Number is set to 9100.
6.
Touch OK.