Xerox WorkCentre 3335/3345 User Guide
Electrical Safety
General Guidelines
Warning
• Do not push objects into slots or openings on the printer. Touching a voltage point
or shorting out a part could result in fire or electric shock.
• Do not remove the covers or guards that are fastened with screws unless you are
installing optional equipment and are instructed to do so. Turn off the printer when
performing these installations. Disconnect the power cord when removing covers and
guards for installing optional equipment. Except for user-installable options, there
are no parts that you can maintain or service behind these covers.
performing these installations. Disconnect the power cord when removing covers and
guards for installing optional equipment. Except for user-installable options, there
are no parts that you can maintain or service behind these covers.
Warning
The following are hazards to your safety:
• The power cord is damaged or frayed.
• Liquid is spilled into the printer.
• The printer is exposed to water.
• The printer emits smoke, or the surface is unusually hot.
• The printer emits unusual noise or odors.
• The printer causes a circuit breaker, fuse, or other safety device to activate.
• Liquid is spilled into the printer.
• The printer is exposed to water.
• The printer emits smoke, or the surface is unusually hot.
• The printer emits unusual noise or odors.
• The printer causes a circuit breaker, fuse, or other safety device to activate.
If any of these conditions occur, do the following:
1.
Turn off the printer immediately.
2.
Disconnect the power cord from the electrical outlet.
3.
Call an authorized service representative.
Power Cord
• Use the power cord supplied with your printer.
• Do not use an extension cord or remove or modify the power cord plug.
• Plug the power cord directly into a properly grounded electrical outlet. Ensure that
• Do not use an extension cord or remove or modify the power cord plug.
• Plug the power cord directly into a properly grounded electrical outlet. Ensure that
each end of the cord is connected securely. If you do not know if an outlet is grounded,
ask an electrician to check the outlet.
ask an electrician to check the outlet.
• Do not use a ground adapter plug to connect the printer to an electrical outlet that
does not have a ground connection terminal.
Warning
Avoid the potential of electrical shock by ensuring that the printer is grounded properly.
Electrical products can be hazardous if misused.
Electrical products can be hazardous if misused.
• Verify that the printer is plugged into an outlet that is providing the correct voltage
and power. Review the electrical specification of the printer with an electrician if
necessary.
necessary.
• Do not place the printer in an area where people can step on the power cord.
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
1-2
User Guide
Safety