Xerox WorkCentre 3335/3345 User Guide

Page of 188
Installing the Print Drivers for UNIX and Linux
Note
• To install the UNIX print drivers on your computer, root or superuser privileges are
required.
• This procedure requires an Internet connection.
To install Linux drivers, perform the following steps, then select Linux instead of UNIX
for the operating system and package.
To install the print driver software:
1. On the printer control panel, for the IP address, do the following:
a) Allow the printer to set up a DHCP address.
b) Print the Configuration Report and keep it for reference.
For details on how to print the Configuration Report, refer to
c) From the Configuration Report, verify that the TCP/IP protocol is enabled and
the network cable is installed.
2. At your computer, do the following:
a) From the print driver website for your printer, select your printer model.
b) From the Operating System menu, select UNIX, then click Go.
c) Select the appropriate package for your operating system.
d) To begin downloading, click the Start button.
3. In the notes below the driver package that you selected, click the Installation Guide
link, then follow the installation instructions.
Other Drivers
The following drivers are available for download:
• The Xerox
®
Global Print Driver works with any printer on your network, including those
printers made by other manufacturers. At installation, it configures itself for your
individual printer upon installation.
• The Xerox
®
Mobile Express Driver works with any printer available to your computer
that supports standard PostScript. Each time you select Print, it configures itself for
the correct printer. If you travel frequently to the same sites, you can save your
favorite printers in that location and the driver saves your settings.
Download the drivers at:
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
3-12
User Guide
Installation and Setup