Xerox WorkCentre 3335/3345 User Guide
• 2-Sided Scan, Short Edge: This option scans both sides of the original image on
the short edge.
• To select the resolution to scan the image, click Resolution, then select an option.
9. To adjust the scan color, click Image Color and select an option:
• Auto: This option detects the color content in the original image. If the original
image is color, the printer scans in full color. If the original is a black and white
document, the printer scans in black and white only.
document, the printer scans in black and white only.
• Color: This option scans in full color.
• Grayscale: This option detects color content and scans as various shades of gray.
• Black and White: This option scans in black and white only.
• To scan the image, click Scan.
• Grayscale: This option detects color content and scans as various shades of gray.
• Black and White: This option scans in black and white only.
• To scan the image, click Scan.
10. To select the resolution to scan the image, click Resolution, then select an option.
11. To scan the image, click Scan.
11. To scan the image, click Scan.
Sending a Scanned Image to a
Destination
Destination
Before scanning to a destination, configure the destination folders on the server or share
the folder on a personal computer. In addition, you must have at least one Scan To
Destination in the address book. If Scan To Destination properties are not properly
configured, the Scan To icon appears grayed out on the touch screen.
the folder on a personal computer. In addition, you must have at least one Scan To
Destination in the address book. If Scan To Destination properties are not properly
configured, the Scan To icon appears grayed out on the touch screen.
To scan an image and send it to a destination:
1. Load the original document on the document glass or in the document feeder.
2. Touch Scan To > Scan Contacts.
3. Select an option.
4. Select the desired name from the list, then touch OK.
5. Change scan settings as needed.
6. Press the green Start button.
1. Load the original document on the document glass or in the document feeder.
2. Touch Scan To > Scan Contacts.
3. Select an option.
4. Select the desired name from the list, then touch OK.
5. Change scan settings as needed.
6. Press the green Start button.
For details, refer to
Adjusting Scanning Settings
Setting the Output Color
If the original image contains color, you can scan the image in color or in black and
white. Selecting black and white significantly reduces the file size of the scanned images.
white. Selecting black and white significantly reduces the file size of the scanned images.
To set the output color:
1. At the printer control panel, press Clear All, then press Services Home.
2. Touch Scan To.
1. At the printer control panel, press Clear All, then press Services Home.
2. Touch Scan To.
7-7
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide
Scanning