Xerox Phaser EX7750 Leaflet
A
A-10
Color Measurement Instruments
Setting up the DTP32
Before you calibrate the EX7750 using the X-Rite DTP32, you need to connect,
configure, and calibrate the densitometer to prepare for measuring the printed patches
(see
configure, and calibrate the densitometer to prepare for measuring the printed patches
(see
on page A-12). For additional information about setting
up and using the DTP32, see the documentation that accompanies the densitometer.
T
O
CONNECT
THE
X-R
ITE
DTP32
TO
THE
COMPUTER
1.
Turn off the computer.
2.
Plug the square end of the interface cable (looks like a modular phone plug) into the
I/O port on the side of the X-Rite DTP32.
I/O port on the side of the X-Rite DTP32.
3.
Attach the connector to the computer.
For a Windows computer, insert the 8-pin mini-DIN end of the interface cable into
the 9-pin DB9 Connector cable adapter. Insert the 9-pin end into the COM1 or
COM2 port on the computer and tighten the screws. If the available port on your
computer is 25-pin, you must use the 8-pin-to-25-pin adapter.
the 9-pin DB9 Connector cable adapter. Insert the 9-pin end into the COM1 or
COM2 port on the computer and tighten the screws. If the available port on your
computer is 25-pin, you must use the 8-pin-to-25-pin adapter.
Square connector
Square connector
Unused connector
Connect to computer
Interface cable
Connect to adapter