Xerox Phaser EX7750 Installation Guide
5
5-8
Setting up the EX7750 from a Windows Computer
Network Setup
Network Setup configures the EX7750 to receive print jobs over the networks used at
your site. If the EX7750 is configured to enable more than one protocol, it
automatically switches to the correct protocol when it receives a print job. When two
network ports are enabled, print jobs can be received over all ports at the same time.
your site. If the EX7750 is configured to enable more than one protocol, it
automatically switches to the correct protocol when it receives a print job. When two
network ports are enabled, print jobs can be received over all ports at the same time.
You can view and specify the following network settings in Network Setup:
• Adapters and ports—view currently configured network adapters and port settings
• Protocols—including AppleTalk, IPX/SPX, and TCP/IP
• Print Services—including LPD printing (TCP/IP), NetWare printing (PServer),
Windows print sharing (SMB), SNMP, HTTP support (WWW), Internet Printing
Protocol (IPP) printing, Port 9100 printing, and E-mail Service
Protocol (IPP) printing, Port 9100 printing, and E-mail Service