Xerox Phaser EX7750 Installation Guide
2
2-10
Setting up Network Servers
You do not need to rerun Setup when you add or remove a NetWare queue; however,
you should restart the EX7750 after you create or remove a queue.
you should restart the EX7750 after you create or remove a queue.
When the EX7750 is configured to connect to a NetWare server, it polls the NetWare
server for jobs in each of its queues. If jobs are found, they are automatically transferred
over the network to the matching connection on the EX7750. For example, jobs from
the NetWare queue with the
server for jobs in each of its queues. If jobs are found, they are automatically transferred
over the network to the matching connection on the EX7750. For example, jobs from
the NetWare queue with the
_print
extension are sent to the EX7750 Print queue.
While a job is processed and printed, a record of the job is being created. You can
access the Job Log containing these records at any time.
access the Job Log containing these records at any time.
Configuring a NetWare server for printing
The following sections explain how to set up a NetWare file server so networked users
can print to the EX7750 from their workstations, and the EX7750 can obtain print
jobs from the NetWare server.
can print to the EX7750 from their workstations, and the EX7750 can obtain print
jobs from the NetWare server.
For each NetWare file server that you configure, follow these general steps. More detail
is provided in subsequent sections and in your NetWare documentation.
is provided in subsequent sections and in your NetWare documentation.
• Make sure the server is connected to a functioning IPX network.
• Log in as the Supervisor on a PC connected to the NetWare file server.
• For NetWare installations, set up an NDS connection (see
• For NetWare in emulation mode, set the bindery context (see
• For NetWare in bindery emulation, set up a file server, print server, and print queue