Xerox Phaser 7300 Installation Guide
Windows 2000/XP Network
Phaser® 7300 Color Printer
25
8.
Click the Local Printer radio button.
9.
Click Next>.
10.
Click the Create a New Port radio button.
11.
Select Standard TCP/IP Port from the New Port Type pull-down menu.
12.
Click Next>.
13.
The wizard now starts the TCP/IP port wizard, click Next>.
14.
Click in the Printer Name or IP Address edit box, and type in the IP Address of the printer you
want to use.
want to use.
15.
Click Next>.
16.
On the Confirmation window, click Finish if the data is correct. If the data is not correct, click
the <Back button to correct any errors.
the <Back button to correct any errors.
17.
Insert your printer’s Printer Installer and Utilities CD-ROM into your computer’s CD-ROM
drive and click Have Disk.
drive and click Have Disk.
18.
Click the Browse button and select the directory containing the Windows 2000 or XP drivers.
19.
Select the *.INF file, then click Open.
20.
The Wizard returns you to the previous dialog. Verify that the path and filename are correct, and
click OK.
click OK.
21.
At the next dialog, enter a name for the printer and select whether you want that printer to be the
default, and then click Next>.
default, and then click Next>.
22.
If the printer is not shared, click Next>. To share the printer, enter a Share Name, check the share
checkbox, and then click Next>.
checkbox, and then click Next>.
23.
At the next dialog, it is recommended that you print a test print. Click Next>.
24.
The Completing the Add Printer Wizard window appears. If all the data presented is correct,
click the Finish button. If not, click the <Back button to correct any errors.
click the Finish button. If not, click the <Back button to correct any errors.
25.
Wait for the test print to print. A new dialog asks for confirmation of the test print; click Yes.
26.
Send a print job to the printer.
27.
Check the print job for print-quality. If print-quality problems exist or if the job does not print,
refer to the Troubleshooting Guide on the Interactive Documentation CD-ROM to correct the
problem or access PhaserSMART from the Troubleshooting tab of your printer driver.
refer to the Troubleshooting Guide on the Interactive Documentation CD-ROM to correct the
problem or access PhaserSMART from the Troubleshooting tab of your printer driver.
Quick install steps (AppleTalk protocol)
1.
At the Desktop, right-mouse-click the My Network Place icon and select Properties.
2.
Right-click the Local Area Connection icon inside the Network and Dial-up Connections
window. Select Properties.
window. Select Properties.
3.
Select the General tab, and verify that AppleTalk Protocol is loaded.
4.
If the AppleTalk software is not present, install it using the documentation provided by Microsoft,
and then return to this document.
and then return to this document.
5.
Open the Control Panel and double-click the Printers icon.
6.
Double-click Add Printer; the Add Printer Wizard starts.
7.
Click Next>.