Xerox Phaser 6700 Administrator's Guide
Initial Setup
16
Phaser 6700 Color Printer
System Administrator Guide
Physical Connection Settings
You can specify Ethernet and USB settings, such as Ethernet Rated Speed, USB Connection Mode, and
Print Timeout for USB printing.
Setting Ethernet Options
1. In CentreWare Internet Services, click Properties > Connectivity > Physical Connections.
2. Click Ethernet.
3. Under Rated Speed, click the down arrow and select the speed of your connection.
4. Click Apply to save the new settings or Undo to retain the previous settings.
2. Click Ethernet.
3. Under Rated Speed, click the down arrow and select the speed of your connection.
4. Click Apply to save the new settings or Undo to retain the previous settings.
Click Default All to reset settings to default values.
Note:
Restart the printer for the new settings to take effect.
Configuring USB Port Settings
1. In CentreWare Internet Services, click Properties > Connectivity > Physical Connections.
2. Click USB Port.
3. Under Connection, select Enabled to enable the USB port.
4. Under Timeout, type the time in seconds that the printer waits inactive before disconnecting from a
2. Click USB Port.
3. Under Connection, select Enabled to enable the USB port.
4. Under Timeout, type the time in seconds that the printer waits inactive before disconnecting from a
device connected to the port.