Xerox Phaser 7760 Administrator's Guide

To configure SNMP v1v2c community names:

Launch your web browser.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx). 

Click Properties.

Select the Protocols folder on the left sidebar.

Select SNMP.

If prompted, enter your Admin or Key User name and password.

On the SNMP Configuration page, click the Configure SNMP v1/v2c button. 

To set community names for GET/SET SNMP queries and traps, enter information (up to 
32 alphanumeric characters) in one or more of the following fields:

These names are not displayed on this page, but are shown as a row of asterisks (*). 

■

GET Community Name: Allows a host to perform SNMP GETS on the printer using 
this community name.

■

SET Community Name: Allows a host to perform SNMP SETS on the printer using 
this community name.

■

Trap Community Name: Allows a host to receive traps from the printer using this 
community name.

Hosts must have these community names configured in their applications to access 

the printer using SNMP v1/v2c. 

Click the Apply button to save the changes.

To add or edit traps for SNMP v1v2c:

On the SNMP Configuration page: Click the Configure SNMP v1v2c button, and then 
click the Configure Traps button.

The Configure Traps page lists the current Trap Destination Addresses for the SNMP 
protocol. 

■

The Address column lists the Trap Destination IP address or DNS Name. 

■

The Version/Type column lists the SNMP Trap version or Inform Request for sending 
to the specified trap address. SNMP Trap versions include SNMP v1 Traps, SNMP 
v2c Traps, and SNMP v2c Inform Requests. 

■

The Traps column lists the types of traps to send to the Trap Destination Address. 
Traps to be received include Printer Traps, Job Monitoring Traps, Cold Start, and 
Authentication Traps.

Do one of the following: