Xerox Phaser 5335 Installation Guide

2

 

1.

Switch the power off by pressing the power 
switch located on the front lower right of the 
printer to the <O> position.
Unplug the power cord from the power 
outlet and the printer.

2.

If paper is loaded in the Tray 1 (Bypass 
tray), remove the paper.
If Tray 1 is not open, open the tray.

3.

Open the upper cover.

4.

Remove the cap from the connector on the 
left inside the printer.

Note
• Keep the cap safe and handy.

5.

Insert the duplex unit A into the printer from 
the front of the printer, sliding the duplex 
unit A along the guides inside the printer. 
Push in the duplex unit A until it stops.

guide